Products

Reach: 62 mm Probe Diameter: 6 mm Ceramic

Reach: 27 mm Ball Diameter: 3 mm Stem material: Ceramic

Reach: 34 mm Probe Diameter: 3.2 / 3.6 mm

Shank Size: 12 mm Reach: 139 mm Probe Tip: 3 mm Ball Available in both Metric and Imperial Tschorn 3D Digital Tester Revolutionary! The n...

Shank Size: 12 mm Reach: 129 mm Probe Tip: 3 mm Ball Tschorn 3D Tester SLIMplus V2 - what is optimized? The Tschorn 3D Tester version 2 - sho...

Shank Size: 12 mm  Reach: 129 mm Probe: 3 mm Unique and BLACK That's the new Tschorn 3D Tester with black scale. Technically, the 3D-Tester is...

Shank Size: 1/2" Reach: 5.08" Probe: 3 mm / 0.118" Unique and BLACK That's the new Tschorn 3D Tester with black scale. Technically, the 3D-Tes...

Shank Size: 20 mm Reach: 135 mm Probe: 3.2 / 3.6 mm Tschorn 3D Tester DREHplus Measure your tools in all axesespecially in Y No other measurin...

Shank Size: 12 mm Reach: 150 mm Probe Tip: 3 mm Ball Tschorn 3D Tester VIplus  - what is optimised? The 3D Tester version 2 - short V2 - is t...

Height: 50 mm Housing Diameter: 39 mm Palper Diameter: 19 mm Tolerance: 50.00 mm +/- 0.01 mm 002050000 Tschorn Zero Setter Optical 50 mm Hig...

Height: 50 mm Housing Diameter: 39 mm Palper Diameter: 19 mm Tolerance: 50.00 mm +/- 0.01 mm 002050200 Tschorn Zero Setter Optical 50 mm for...

Height: 60 mm Housing Diameter: 32 mm Palper Diameter: 19 mm Tolerance: 60.00 mm +/- 0.01 mm 002060200 Tschorn Zero Setter Turning 60 mm Hig...

Height: 4" Housing Diameter: 2.15" Palper Surface Diameter: 1.65" Tolerance: 4" +/- 0.0004" 00240204I Tschorn Zero Setter Micro Inch Version...

Height: 100 mm Housing Diameter: 54.5 mm Palper Diameter: 42 mm Tolerance: 100.00 mm +/- 0.01 mm 002402100 Tschorn Zero Setter Micro with Ma...

Permanent 3D scanning spray Optimized for optical measurement technology Cooperative grey for even better contrasts Free of ethanol and titanium d...

Permanent 3D scanning spray Optimized for optical measurement technology 1L Reusable Container Cooperative grey for even better contrasts Free of...

The DM-50 is a manual applicator gun designed for applying product in 50ml cartridges using a nozzle. Fully compatible with the plastiform range, ...

Nozzles are small plastic parts designed for mixing two-component Plastiform in cartridges. They ensure a perfect 1:1 ratio mix, resulting in a hom...

he Double Blade Cutter is designed with two parallel blades to cut impressions and create 1 mm slices, which are easier to analyze on optical equip...

Plastin is a technical modeling paste designed for industrial use only. Unlike regular modeling pastes, it won’t dries out and maintains its elasti...

The tips are small plastic elements that connect to your mixing nozzles. They are used to control the flow rate at the nozzle outlet. Tips ensu...

M4 to M3 Adaptor / Extension Length: 20.0mm Material: Stainless Steel

The F20 is the perfect product to create total impression of very complex forms. It stands out with its initial Fluidity, making it effortlessly fl...

The F30 Max is the most stretch-resistant product in the entire range. It can be used when no other product are able to be extracted from the par...

The F30 Visual is a very fluid product designed to easily infiltrate small cavities or details of a surface. It can fill spaces with a diameter of...

F40 is the intermediate product between F20 and F50, it is more resistant than the F50 and harder than F20, allowing you to cut it with the Double...

F50 stands as the most versatile product among the whole Plastiform range. Renowned for its exceptional technical properties, F50 efficiently addre...

F65 is a low-fluidity product designed for mechanical clearance controls of hard to access areas. The final impression is semi-rigid (65 Shore A h...

The F85 is an extremely fluid product easy to insert into parts and that become very rigid after polymerizing. It produces a rigid final impressio...

P25 is a product specially developed for making highly complex total impressions in areas requiring a non-flowing product. It’s a pasty product, w...

The P35 has an initial paste-like consistency, making it suitable for application on vertical or overhanging surfaces. As it does not flow, it’s id...

The P51 SD is the most rigid product of the range. It is dedicated to contact measurement of mechanical clearance or simple external forms. It hav...

The P80 Ra is a non-flowing pasty product specifically developed for Roughness Measurement. Its initial consistency makes it a good fit for hard-to...

Thread Size: M2 Ball Size: 1 mm Cylinder Cylinder Material: Ruby Stem Length: 15 mm Stem Material: Stainless Steel Effective Working Length:...

L: 59.5 mm  LK: 56.5 mm DS: 3.5 mm Material: Carbide GRD/Alpha: 12° R: 0.025 mm  Compatible with Mahr 6851517

L: 59.5 mm  LK: 56.5 mm DS: 3.5 mm Material: Ceramic GRD/Alpha: 12° R: 0.025 mm  Compatible with Mahr 6851517

L: 33 mm  LK: 30.5 mm DS: 3.5 mm Material: Carbide GRD/Alpha: 12° R: 0.025 mm  Compatible with Mahr 6850286

L: 33 mm  LK: 30.5 mm DS: 3.5 mm Material: Ceramic GRD/Alpha: 12° R: 0.025 mm  Compatible with Mahr 6850286

L: 20.5 mm  LK: 18 mm DS: 3.5 mm Material: Carbide GRD/Alpha: 12° R: 0.025 mm  Compatible with Mahr 6850289

L: 20.5 mm  LK: 18 mm DS: 3.5 mm Material: Ceramic GRD/Alpha: 12° R: 0.025 mm  Compatible with Mahr 6850289

L: 6 mm  DS: 1 mm Material: Carbide GRD/Alpha: 19° R: 0.025 mm  Compatible with Mahr 6851518 Compatible with Mahr 6851527

L: 6 mm  DS: 1 mm Material: Ceramic GRD/Alpha: 19° R: 0.025 mm  Compatible with Mahr 6851518 Compatible with Mahr 6851527

L: 59.5 mm  LK: 56.5 mm DS: 3.5 mm Material: Carbide GRD/Alpha: 24° R: 0.025 mm  Compatible with Mahr

L: 33 mm  LK: 30.5 mm DS: 3.5 mm Material: Carbide GRD/Alpha: 24° R: 0.025 mm  Compatible with Mahr 6851534

L: 20.5 mm  LK: 18 mm DS: 3.5 mm Material: Carbide GRD/Alpha: 24° R: 0.025 mm  Compatible with Mahr 

L: 52 mm  LK: 50.1 mm DS: 3 mm Material: Carbide GRD/Alpha: 11° R: 0.02 mm  Compatible with Hommel 232633